Standards & Certification

What Does EN 1082-1 Actually Cover?

EN 1082-1 is the chainmail glove standard behind our CE mark. Learn what it covers, which models each certificate covers, and how to check one before you buy.

cover-guide3-1200x700
EN 1082-1:1996 is the standard for chainmail gloves and arm guards against cuts and stabs from hand-held knives, and it is the basis for our gloves' CE marking. The route is Category II PPE: Module B type examination plus Module C, with SATRA, Notified Body 2777, as the notified body. Certificate 2777/26322-01 covers 5201, 1208/1215/1220, 5301 and 1308/1315/1320 until 2029-10-24. Certificate 2777/12679-02 covers 5101 until 2029-04-26. The 1101, 3101, 3201 and 5401 models, the aprons, and XXL sizes are not covered by either certificate. This article shows you how to check a certificate against the model you want. Read it before you order, not after. It fits buyers who must prove compliance to a customer or an inspector. It does not fit buyers shopping by price alone.

A Certificate That Does Not Cover Your Model Is No Certificate

Your compliance team asks for the file. You send a certificate, and it comes straight back: the certificate names a different model from the one you ordered. Now you are asking the supplier for another file while your order waits, and the delay is yours, not theirs. That is what happens when CE is checked by the shop instead of by the model. A CE mark belongs to a named model on a named certificate, not to a brand, a factory, or a catalogue. The check takes three minutes, and it is worth doing before you order. This article shows you the check. It states what EN 1082-1 covers, lists which models each certificate covers, and gives you three checks to run on any certificate before you buy.

What the Standard Covers — and What It Does Not

EN 1082-1:1996 covers gloves and arm guards made of chainmail, worn against cuts and stabs from hand-held knives. The rings are AISI 316L stainless steel, 3.81 mm across. That is its whole scope: the material is steel rings, the threat is a hand-held blade, and the product is a glove or an arm guard. It is not a cut level, so do not read it like one. It gives no letter like EN 388 and no number like the ANSI scale. Our gloves hold two CE certificates under this standard, both issued with SATRA, Notified Body 2777, as the notified body. Certificate 2777/26322-01/E00-00 covers the 5201 glove, the 1201 series variants 1208, 1215 and 1220, the 5301 glove, and the 1301 series variants 1308, 1315 and 1320, and it runs to 2029-10-24. Certificate 2777/12679-02/E00-00 covers the 5101 glove and runs to 2029-04-26. Some models hold no CE certificate at all. The 1101 glove, the 3101 and 3201 three-finger gloves, the 5401 glove, and both aprons are not covered by either certificate, and we will not write a CE claim for them. The variants inside the 1201 and 1301 series are named on the certificate, but how they differ from each other is not confirmed, so ask us before you order a variant by name. Sizes have the same model-by-model rule. Commercial sizes run XXS to XXL, but CE coverage runs only to XL, so an XXL glove is not covered by the current CE certificates. Check the size the same way you check the model: on the certificate, not on the shop page. Two other documents are often confused with this standard, and neither is a product certificate. The ISO 9001:2015 certificate, 02825Q11517R0M, belongs to the factory that makes the gloves, Anping Zhonghe Filter Co Ltd, and it runs to 2028-05-13. It is a system certificate for the factory, not a Steelora badge and not a glove certificate. The SGS food-contact testing, FDA and LFGB, passed in 2024 at material level for the 316L steel. That is a material test result, not an approval from the FDA and not a glove certificate.

How to Read a Certificate in Three Checks

Check one is the certificate number. Ask the supplier for the certificate file, then read the model names on it. The number must be 2777/26322-01 for the 5201, the 1201 series, the 5301, and the 1301 series, or 2777/12679-02 for the 5101. If the number on the file is different, or the model you want is not named on it, the certificate does not cover your order. Check two is the issuing body. The notified body on both certificates is SATRA, Notified Body 2777. A file from any other body, or a file with no body named, is not the same evidence. Read the name on the file and match it to the number you were given. Check three is the expiry date. Certificate 2777/26322-01 runs to 2029-10-24 and certificate 2777/12679-02 runs to 2029-04-26. A certificate past its date is not valid evidence, even if the model name matches. Ask for the current file, not a scan from an old order. If the supplier sends a summary slide instead of the certificate file, ask for the file itself. A slide can show any words, but only the file carries the certificate number, the issuing body, and the expiry date. If your model holds no certificate, you can still buy it, but we cannot supply a CE or EN file for it. That is a fact to put in front of your compliance team before you order, not after the goods arrive. Your team decides by its own rules whether an uncertified model is acceptable for the job.

Three Ways a Certificate Check Goes Wrong

The first way is judging CE by the whole shop. A supplier with one certified model does not have a certified range, and a shop page that shows a CE mark does not prove that every glove on the page is covered. Check the model you want, on the certificate that names it, every time. The second way is taking a sample result for a certification. Our ANSI A9 rests on one CTC Shanghai report, S201212763_1, from 2020, which measured over 13000 g on the samples sent in. That result covers those samples only. It is not a product certification, it does not extend to the whole range, and it does not replace the EN 1082-1 certificates above. The third way is accepting a document that proves something else. The factory's ISO 9001 certificate proves the factory runs a quality system. The SGS food-contact result proves the steel passed a material test. The single-ring tensile result of 222 N, from one ring tested in 2023, proves that one ring held that force. None of the three proves that a glove is CE certified. Keep each document in its own place.

Your Next Step: Check Your Model Before You Order

Write down three things before you ask for a quote. The model you want, by its exact number. The size you wear. Whether your customer or inspector needs a CE file with the order. Those three lines decide which certificate applies, and whether one applies at all. Keep the list with your enquiry, and ask the supplier for the matching certificate file at the same time. A supplier who can send the file before you order is a supplier you can trust with the order itself. Send the model, the size, and whether you need CE files to sales@steeloramesh.com, and we will confirm which certificate covers your model, list the documents we can supply, and reply within 1 working day. That reply names the certificate and its expiry date, so your compliance team can check it without asking twice.

Read next

Buying Guides and Standards Notes

Read the latest buying guides and standards notes from the Steelora team.

No content is available yet.