glove_1301
overview_extended_comparison
overview_extended_flatlay
range_extended
detail_mesh
Extended-Cuff Gloves

1301 Series Extended-Cuff Gloves — TPU Snap Strap

Extended-cuff chainmail gloves with a quick-release TPU snap strap — three cuff lengths, 8, 15 or 20 cm, for forearm protection on cutting lines.

Specifications

Material
AISI 316L stainless steel
Ring diameter
3.81 mm (0.15 in)
Wire diameter
0.52 mm
Cuff length
8 cm (3.15 in) / 15 cm (5.91 in) / 20 cm (7.87 in) by model (1308 / 1315 / 1320)
Closure
Plastic/TPU snap strap, quick-release and replaceable (base model 5301)
Style
Extended-cuff glove, left or right hand
Models covered
1308, 1315, 1320
Sizes
XXS–XL; XXL outside current CE coverage
Certification
CE, SATRA NB 2777, cert. 2777/26322-01/E00-00, EN 1082-1:1996 Pass, valid to 2029-10-24
Cut test (samples)
Sample testing reached ANSI A9 level — CTC Shanghai 2020, report S201212763_1, TDM >13,000 g (samples only)
Food contact (material)
SGS FDA + LFGB testing on 316L material, passed 2024
Single-ring tensile
222 N (2023, single sample result)
Manufacturer system cert
ISO 9001:2015, cert. 02825Q11517R0M, valid to 2028-05-13 (manufacturer-held, not a Steelora badge)
Cleaning
Wash at least once a day in 50 °C (122 °F) soapy water or water with detergent; store in a cool, ventilated place
HS code
7326209000
Trade terms
EXW Anping, China; freight confirmed per order

The Quick-Release Strap: What Makes the 1301 Different

The 1301 series is an extended-cuff chainmail glove built on the 5301 wrist glove. The hand and the cuff are the same AISI 316L stainless steel mesh as the rest of the Steelora glove range — rings 3.81 mm (0.15 in) in diameter, wire 0.52 mm, linked into a mesh with no fibre or coating in the working surface. What sets the 1301 apart is how it closes.
Instead of a steel hook, the 1301 closes with a plastic/TPU snap strap. The strap fastens and releases by the snap: press it closed to wear the glove, press it open to take the glove off. There is no hook to thread through a ring and no textile strap to tie. That single difference is the reason to choose this series over the 1201, which is the same glove with a steel hook closure.
The strap is also replaceable. If the strap wears out before the mesh does, the strap can be replaced without replacing the whole glove. Replacement straps are confirmed with the order — say so in your enquiry if you want spares with the first order.
The cuff comes in three lengths: model 1308 at 8 cm (3.15 in), model 1315 at 15 cm (5.91 in) and model 1320 at 20 cm (7.87 in). The 20 cm length is the reference value on the certificate; confirm availability when you order. Sizes run from XXS to XL, for the left hand or the right hand. XXL is sold but sits outside the current CE coverage.
It is cut-resistant, not cut-proof. No chainmail glove stops every cut, and this page does not claim otherwise.

Which Jobs Suit a Quick-Release Cuff

A quick-release strap earns its place where the glove comes on and off through the shift. On a line where the same worker moves between cutting and other tasks, the glove can be taken off and put back on without a fiddly fastening. Where hand washing is frequent, the glove comes off fast and goes back on fast. Where several workers share gloves across a shift, the snap makes the changeover quick. And where a glove catches on something, a snap that opens under a pull is a simpler way out than a hook that has to be unthreaded.
That makes the 1301 a fit for slaughter and cutting lines, fish filleting tables, and glass and metal handling — the same workplaces as the 1201 — with the difference being how often the glove is removed during the day. If the glove stays on for the whole shift and the closure is never touched, the 1201's steel hook does the same job. If the glove is taken off and put back on repeatedly, the 1301's snap strap is the easier closure.
The series also suits the distributors and wholesalers who supply those workplaces, particularly where the end users ask for a strap that is easy to fasten with wet hands or gloved hands. Name the working pattern in your enquiry — how often the glove comes off, and whether the wearer fastens it alone — and the fit can be checked before anything is quoted.

1301, 1201, 5201 or 5301: Choosing by Closure

The four models below share the same mesh and the same certificate. They differ in two things: how long the cuff is, and how the glove closes. Choose by those two things.

1301 series
1201 series
5201
5301
Cuff
Extended — 8, 15 or 20 cm (1308 / 1315 / 1320)
Extended — 8, 15 or 20 cm (1208 / 1215 / 1220)
Wrist length
Wrist length
Closure
Plastic/TPU snap strap — quick-release, replaceable
Steel hook
Steel hook
Plastic/TPU snap strap — quick-release, replaceable
Base glove
5301
5201
Itself
Itself
Certificate
2777/26322-01/E00-00
2777/26322-01/E00-00
2777/26322-01/E00-00
2777/26322-01/E00-00
Choose it when
The forearm needs cover and the glove comes on and off through the shift
The forearm needs cover and the closure stays fastened all shift
Only the wrist needs cover, with a hook closure
Only the wrist needs cover, with a quick-release strap
All four are covered by the same CE certificate (2777/26322-01/E00-00, EN 1082-1:1996, valid to 2029-10-24). The certificate covers sizes up to XL on each model; XXL is sold but sits outside the current CE coverage. The 20 cm cuff length on the 1301 and 1201 is the reference value on the certificate; confirm availability when you order.
If the cuff length is the only question, the 1301 and the 1201 are the same glove in three lengths — pick by the closure. If the closure is the only question, the 1301 and the 5301 share the same snap strap — pick by whether the forearm needs cover.

Looking After the Strap: Release, Replacement and Cleaning

The strap is a TPU snap fitting. To take the glove off, press the snap open and slide the glove off the hand. To put it back on, slide the glove on and press the snap closed. There is nothing to thread, tie or adjust each time.
If the strap wears — the snap loosens, or the strap itself is cut or torn — the strap can be replaced without replacing the glove. Say so in your enquiry if you want replacement straps with the order, and the number of spares can be confirmed in the reply.
Cleaning follows the glove's daily routine, and the strap is washed as part of the glove: wash at least once a day in 50 °C (122 °F) soapy water or water containing detergent, and after cleaning store the glove in a cool, ventilated place. Do not use a cleaning method that is not on record for this glove — if a cleaning agent or a disinfection temperature is required by the buyer's own rules, say so in the enquiry so it can be checked before ordering.

Cuff Lengths, Sizes and the Certificate

The series covers three cuff lengths, and each length is a separate model on the same certificate:
  • 1308 — cuff 8 cm (3.15 in)
  • 1315 — cuff 15 cm (5.91 in)
  • 1320 — cuff 20 cm (7.87 in); the 20 cm length is the reference value on the certificate, so confirm availability when you order
All three models are listed on EU type-examination certificate 2777/26322-01/E00-00, issued by SATRA (NB 2777) under EN 1082-1:1996, valid to 2029-10-24. The certificate covers sizes up to XL; XXL is sold but sits outside the current CE coverage.
The evidence on record is stated exactly as it stands. A single ring pulled to 222 N in a 2023 test on a single sample. Sample testing by CTC Shanghai in 2020 (report S201212763_1) reached ANSI A9 level, with a TDM result above 13,000 g — that result covers the samples tested only. It is not a product certification, and this page does not present it as one. Food-contact testing is at material level: SGS FDA and LFGB testing on the 316L material passed in 2024. The manufacturer holds ISO 9001:2015 (certificate 02825Q11517R0M, valid to 2028-05-13). That certificate belongs to the manufacturer. It is not a Steelora badge.

What to Put in Your Enquiry

Send an enquiry through the RFQ form and include six things: the series (1301), the model if you need one in particular (1308, 1315 or 1320), the hand (left or right), the size, and the quantity — plus your target market. If you want replacement straps with the order, say how many.
If the glove is for a specific line, such as slaughter, filleting or glass work, say so, and say how often the glove comes off during the shift. It helps confirm the fit before anything is quoted.
In return you receive confirmation of the model and size, the evidence that applies to it — CE certificate number, sample test report reference and material statement — and the current sample terms. Standard in-stock samples are not free; the terms that apply to your order are confirmed in the reply.
This page carries no price. Prices are confirmed per enquiry, and lead time is confirmed per order. Steelora replies within 1 working day.

Frequently Asked Questions

How is the 1301 different from the 1201?

By the closure and the base glove. Both series offer the same three cuff lengths — 8, 15 or 20 cm. The 1301 is built on the 5301 wrist glove with a plastic/TPU snap strap that releases quickly and can be replaced; the 1201 is built on the 5201 with a steel hook closure. The 20 cm length is the certificate reference value; confirm availability when you order. No weight figure is published for either series.

When is a quick-release strap the better choice?

When the glove comes off and goes back on repeatedly during the shift — moving between cutting and other tasks, frequent hand washing, or shared gloves across a shift. If the glove stays on all shift and the closure is never touched, the 1201's steel hook does the same job.

Can the strap be replaced if it wears out?

Yes. The strap is a separate snap fitting, and a worn strap can be replaced without replacing the glove. Ask for replacement straps in your enquiry and the number of spares can be confirmed in the reply.

How do I clean the glove and the strap?

Wash the glove — strap included — at least once a day in 50 °C (122 °F) soapy water or water containing detergent, and after cleaning store the glove in a cool, ventilated place.

What is the difference between the 1308, 1315 and 1320?

The cuff length: 1308 is 8 cm (3.15 in), 1315 is 15 cm (5.91 in) and 1320 is 20 cm (7.87 in). All three are listed on the same CE certificate (2777/26322-01/E00-00). The 20 cm length is the certificate reference value; confirm availability when you order. Name the model in your enquiry.

How are samples charged?

Standard in-stock samples are not free. The sample terms that apply to your order are confirmed in the enquiry reply.

Continue browsing

Our Chainmail Gloves

AISI 316L stainless steel chainmail gloves — wrist gloves and extended cuffs, certified model by model under EN 1082-1.