




Aprons
Shoulder-Strap Chainmail Apron
Chainmail apron with shoulder straps that share the weight, for long shifts on slaughter and filleting lines. Sizes 45 × 80, 55 × 90 and 65 × 100 cm.
Specifications
- Material
- AISI 316L stainless steel
- Ring diameter
- 3.81 mm (0.15 in)
- Wire diameter
- 0.52 mm
- Style
- Chainmail apron with shoulder straps, torso protection
- Dimensions
- Recorded sizes 45 × 80, 55 × 90, 65 × 100 cm (17.72 × 31.50, 21.65 × 35.43, 25.59 × 39.37 in); confirm size with the order
- Straps
- Shoulder straps, share the apron weight
- Certification
- No current model certificate; confirm applicable documents when ordering
- Single-ring tensile
- 222 N (2023, single sample result)
- Food contact (material)
- SGS FDA + LFGB testing on 316L material, passed 2024
- Manufacturer system cert
- ISO 9001:2015, cert. 02825Q11517R0M, valid to 2028-05-13 (manufacturer-held, not a Steelora badge)
- Cleaning
- Wash at least once a day in 50 °C (122 °F) soapy water or water with detergent; store in a cool, ventilated place
- Trade terms
- EXW Anping, China; freight confirmed per order
How the Shoulder Straps Carry the Weight
A chainmail apron is steel, and steel has weight. The question on this apron is not whether it weighs something — it does — but where that weight sits. On the shoulder-strap apron, the answer is the shoulders.
Two straps run over the shoulders and carry part of the apron's weight. The load is shared across the shoulders instead of hanging from the waist, so no single point takes the whole weight of the panel. The panel still runs from the chest down past the waist, and it still goes on over work clothes, on top of the gloves, so the protection runs from the hands to the torso without a gap. The difference is only in how the weight is carried.
That is the whole point of the straps. They do not change the mesh, the material or the coverage. They change where the weight goes.
Wearing It All Shift
On a slaughter line or a filleting table, the blade works close to the body as well as to the hands, and the apron that stands between them is on for the whole shift. A weight that is tolerable for an hour becomes a burden by the end of a shift if it all hangs from one place. Spreading it across the shoulders is what makes the apron wearable for hours at a time.
This apron is the option for buyers whose apron stays on for the full shift: slaughter and cutting lines, fish filleting tables, and any line where the apron is put on at the start of the shift and taken off at the end. Distributors and wholesalers who supply those workplaces will find it the version to offer where the end users wear the apron all day rather than putting it on for a single task.
If the apron is worn for short spells only — put on for one cutting job and taken off again — the weight has less time to matter, and the standard apron, which hangs from the waist, does the same protective job. The shoulder straps earn their place over hours, not minutes.
Chainmail resists cuts; it does not make the wearer cut-proof. No chainmail apron stops every cut, and no such claim is made here. What is documented is the material itself: AISI 316L stainless steel rings, 3.81 mm (0.15 in) in diameter, wire 0.52 mm, linked into a mesh. The apron holds no current model certificate. That is stated plainly on this page, and the documents that apply to an order are confirmed before ordering.
Shoulder-Strap or Standard: Which Apron Fits the Job
The two aprons share the same mesh, the same steel and the same care. They differ in how they are worn and in the sizes they come in.
| Shoulder-strap apron | Standard apron |
|---|---|---|
How it is worn | Shoulder straps run over the shoulders and carry part of the weight | Flat panel, hangs from the waist |
Where the weight sits | Shared across the shoulders | At the waist |
Suits best | Full shifts — the apron stays on for hours | Short spells, or where the buyer prefers a plain panel |
Sizes | Recorded sizes 45 × 80, 55 × 90, 65 × 100 cm | Stock sizes 55 × 60, 55 × 70, 55 × 80, 60 × 80 cm |
Material | AISI 316L, ring 3.81 mm, wire 0.52 mm | Same mesh |
Certificate | None — no current EN ISO 13998 certificate | None — no current EN ISO 13998 certificate |
No weight figure is published for either apron, and this page does not state one. No comparison of weight between the two aprons is made on this page, because the comparison basis is not on record. Choose by how the apron is worn and how long it stays on, not by a weight figure.
Sizes and Fit
Recorded sizes for the shoulder-strap apron are:
- 45 × 80 cm (17.72 × 31.50 in)
- 55 × 90 cm (21.65 × 35.43 in)
- 65 × 100 cm (25.59 × 39.37 in)
The first number is the width, the second is the length. The panel runs from the chest down past the waist. If a different size is needed, say so in the enquiry — the size is settled when the order is placed.
The apron goes on over work clothing. The shoulder straps sit over the shoulders; the panel hangs in front of the torso. If the fit matters for a particular build or a particular line — a tall worker, a seated task, a line where the apron catches — describe it in the enquiry so the fit can be checked before ordering.
What the Apron Is Made Of, and What It Is Not Certified For
The mesh is interlinked AISI 316L stainless steel rings — 3.81 mm (0.15 in) across, wire 0.52 mm — with 316L all the way through and no fibre or coating on the working face. It is the same mesh the gloves are made from, so the cleaning routine and the test evidence match the gloves: the same steel, the same ring size, the same material-level food-contact testing.
The apron range currently has no CE certificate. The factory confirmed on 2026-09-14 that there is no current EN ISO 13998 certificate for the aprons. Confirm the documents that apply to your order before ordering.
On the test evidence, here is what is on record and nothing more. Food-contact testing sits at material level: SGS FDA and LFGB testing on the 316L material passed in 2024. A single ring was pulled to 222 N in a 2023 test on a single sample — that result covers the sample tested only and is not a product certification. The manufacturer holds ISO 9001:2015 (certificate 02825Q11517R0M, valid to 2028-05-13); that certificate belongs to the manufacturer and is not a Steelora badge.
For cleaning, wash the apron every day — at least once — in soapy water at 50 °C (122 °F), or water with detergent, then keep it somewhere cool with air moving after it is clean.
What to Put in Your Enquiry
Use the RFQ form and give four things: the product (shoulder-strap apron), the size, the quantity, and your target market. Add the line the apron is for — slaughter, seafood processing, or another cutting line — and how long the apron stays on in a shift. Those two details are what let the fit be confirmed before anything is quoted.
What comes back is confirmation of the product and the size, the evidence that applies — material statement and the single-ring test result — and the sample terms that apply to the order. Standard in-stock samples are not free; the terms are confirmed in the reply.
No price is printed on this page; prices are confirmed per order, lead time is confirmed per order, and Steelora replies within 1 working day.
Frequently Asked Questions
Does the shoulder-strap apron carry a CE certificate?
No. There is no current EN ISO 13998 certificate for the aprons — the factory confirmed this on 2026-09-14. Ask which documents apply to your order before ordering.
What do the shoulder straps do?
They run over the shoulders and carry part of the apron's weight, so the load is shared across the shoulders rather than hanging from the waist. That suits buyers who wear the apron for long shifts.
Shoulder-strap or standard — which should I choose?
By how long the apron stays on. If it stays on for a full shift, the shoulder straps spread the weight and are the better fit. If it is worn for short spells, the standard apron does the same protective job. Both use the same mesh and neither carries a CE certificate.
What sizes does the shoulder-strap apron come in?
45 × 80, 55 × 90 and 65 × 100 cm (17.72 × 31.50, 21.65 × 35.43 and 25.59 × 39.37 in). The size is settled when the order is placed.
How do I clean the apron?
Every day, at least once, in soapy water at 50 °C (122 °F) or water with detergent, then keep it somewhere cool with air moving after it is clean.
How are samples charged?
Standard in-stock samples are not free. The terms for your order are confirmed in the enquiry reply.
